Speed Bumps

Two Heights Available

• Low Profile 2"H in 6' lenghts
• Standard 2.5"H in 4' and 6' lengths

For parking lots & low speed roadways

• 2"H slows traffic 1 -5 mph
• 2.5"H slows traffic 2 -5 mph

Recycled rubber

• Won't chip, crack, or crumble
• Resistant to weather, oil, salt, moisture
• Protected from UV light

Conforms to surface contours

• Flexible rubber
• Cut with a utility knife

Install on asphalt or concrete

• Installation hardware sold separately

Refective yellow stripes

• Molded-in reflective tape

Add cat eye reflectors

• Increases visibility at night

Optional End Caps

• Sold separately

Weight bearing capacity

• 44,000 lbs./axle

Made in the U.S.A.

Hardware:

Part XASPHALT - 14" x 1/2" rebar spike and 5/8" washer

Part XCONCRETE - 4 1/2" lag bolt, 2" lag shield, 1/2" washer

Installation hardware sold separately. See installation instructions in documents.

Specifications:

6 Foot Low Profile Speed Bump

Dimensions: 72”L x 12”W x 2”H

Weight: 40 lbs.

4 Installation Holes

End Cap

Dimensions: 7"L x 12"W x 2"H

End Cap Weight: 2.25 lbs.

2 Installation Holes

6 Foot Standard Speed Bump

Dimensions: 72”L x 12”W x 2.5”H

Weight: 52 lbs.

4 Installation Holes

4 Foot standard Speed Bump
Dimensions: 48”L x 12”W x 2.5”H

Weight: 35 lbs.

3 Installation holes

End Cap

Dimensions: 7"L x 12"W x 2.5"H

End Cap Weight: 3.5 lbs.

2 Installation Holes

Above are nominal dimensions. For critical applications, a sample of current production parts should be evaluated.

Part Numbers: SB72N, SB48N-S, SB72-2H

Speed Bump Product Information

Speed Bump Installation Instructions

6' Low Profile Speed Bump Specification Sheet

4' Standard Speed Bump Specification Sheet

6' Standard Speed Bump Specification Sheet